Elements Jacket – CWAS (Cold Weather Aviation System) with Battleshield X Fabric

SKU: MJKT00059

The Elements Jacket – CWAS is designed for the U.S. Air Force, is authorized Safe-to-Fly, and is approved for all aircrew on all platforms. This Elements Jacket offers in-flight, world-class performance with a low-profile ergonomic fit for ease of tight space maneuvering to access needed gear and hose port systems – while being made with fully flame-resistant 4-way stretch Massif Battleshield X softshell fabric featuring WINDSTOPPER technology by GORE-TEX LABS, a highly water-resistant, 100% windproof, and very breathable membrane. This Elements jacket, constructed with DuPont Kevlar and Nomex brand fiber, is a softshell jacket that offers exceptional breathability, durability, and a high warmth-to-weight ratio.

Elements Pant – CWAS (Cold Weather Aviation System) with Battleshield X Fabric

SKU: MPNT00078

The Elements Pant – CWAS (Cold Weather Aviation System) is designed for the U.S. Air Force, is authorized Safe-to-Fly, and is approved for all aircrew on all platforms. This Elements pant offers in flight, world-class performance with a low-profile ergonomic fit for ease of tight space maneuvering to access needed gear and hose port systems – while being made with fully flame-resistant 4-way stretch Massif Battleshield X softshell fabric featuring WINDSTOPPER technology by GORE-TEX LABS, a highly water-resistant, 100% windproof, and very breathable membrane. This Elements pant, constructed with DuPont Kevlar and Nomex brand fiber, is a softshell pant that offers exceptional breathability, durability, and a high warmth-to-weight ratio.

Emergency Landing Pad

SKU: ELP

The design of the Emergency Landing Pad (ELP) was created to facilitate the safe execution of an aircraft recovery during a landing gear malfunction. The ELP is an all-weather system that can be tailored to support any size of tiltrotor or helicopter.

EOD Training Simulator Kit

SKU: X-EODK

The Explotrain EOD Training Simulator Kit combines the most popular IED Training Gear for EOD units into one case that immediately takes training to the next level.

EWOC Fire-Resistant Hood

SKU: MHDW00021

The EWOC Hood, short for Extreme Weather Overhead Cover, is your go-to headgear in extreme cold conditions. Designed and built with multiple communities in mind, the Extreme Weather Overhead Cover is designed to regulate your body temperature and keep you performing at peak efficiency, no matter the conditions. From aircrew (FR – made with Dupont Kevlar and Nomex) to security forces (Non-FR), all communities will appreciate the ease of transitioning through all 3 options, while freeing up pocket space for mission critical tools. Easily integrated with any of your Massif outerwear, this hood can be worn up or down comfortably and has a built-in neck gaiter that stays put, thanks to its solid elastic design. The EWOC Hood is all about making your job easier – with less stuff in your pockets and less weight to carry, you can stay quick and efficient.

Expedition Series Tent

SKU: E-SERIES SHELTER

The Expedition System is an ideal rapid deployable preparedness product for use domestically and abroad. With Expedition options 16, 24, 32, and 40, this series is designed to be connected and grow with your mission.

Express Mag Pouch

SKU: C626

The Express Mag Pouch is an easy way to carry a spare magazine pouch. The Express Mag Pouch comes in two different configurations: with a Push-Button Locking Mount (PLM) or with a Secure Quick Release (SQR) Molle Mount. The Express Mag Pouch can be canted 20° to the front or 20° to the rear. The pouch is flared at the top for easy re-insertion of the magazine.

Extended Pistol / Baton TACO MOLLE

SKU: 11EX00-XX

This versatile pouch will securely hold almost any high-capacity pistol or submachine gun magazine.

Extreme Duty Firefighting Ranger Vehicle

SKU: EXTREME DUTY FIRE

Confidently navigate off-road firefighting duties with this extreme duty package featuring the firefighting skid built tough to withstand even the most challenging of calls. This package comes standard with the Ranger XD 1500 featuring all-day comfort and top-of-the-line off-road capability. Also available in XD 1500 CREW 6 person cab.

Extreme Weather Insulated Liner

SKU: CMC-EWL-SC

Camel Insulated Liners are designed to assist field heaters and air conditioners maintain specific temperature ranges inside the shelter during operational use. The design limits lost air through openings and unprotected areas by overlapping and filling vacancies and openings that can permit temperature loss. These liners provide upgrades to single ply liners that provide enhanced environment protection to the Command & Control (C2) equipment used in the Tactical Operations Center (TOCs) during extreme environmental conditions.

FANG F7

SKU: FANG F7

The Fang F7 is a 7” first person view (FPV) small UAS designed to put operators directly “in the cockpit” with full manual control. Built as a versatile, lower-cost flying camera system, it enables repetitive training and immersive flight experiences without the expense of higher-end platforms.

The Fang F7 represents a major leap in accessible, secure FPV technology. Built to meet federal procurement and NDAA compliance standards, it combines a rugged carbon fiber frame with a retrievable design, giving operators the ability to train, refine, and execute missions repeatedly without the cost of one-time-use systems.

FieldFox Handheld Microwave Analyzer, 26.5 GHz

SKU: N9918B

A lightweight, durable cable and antenna analyzer, spectrum analyzer, network analyzer, and more.

Fire Vulcan LED Lantern

SKU: FIRE VULCAN LANTERN

Rechargeable Firefighting LED Lantern.

The Fire Vulcan LED lantern is a critical firefighting tool that will even float in water. Its bright beam reaches long distances while still providing optimum peripheral illumination to aid in navigation, and two bright blue taillight LEDs make certain that you can be seen in thick smoke.

FireSight: Standard Fire Watch Unit

SKU: BST-FS-RFW-FM

Industrial Robotic Fire Watch solution serves as a rapidly deployable, independent fire detection system protecting industrial facilities from damage that can result from hot work-related fires, degraded fire zones, and unexpected combustible events.

Flamestretch Pant

SKU: Men’s: MPNT00004 / Women’s: MPNT00074

Designed to be an insulating layer worn over Cool Knit and/or HotJohns garments. Flamestretch fabric is highly breathable while trapping heat to keep you warm and comfortable.

Constructed with DuPont Nomex brand fiber, the first flame-resistant fiber selected for use in military uniforms. Nomex fibers carbonize and thicken when exposed to the intense heat of a flash fire, creating a protective barrier that reduces or prevents burn injuries. When operating in cold conditions, the Massif Flamestretch Pant, our warmest layering option, is the ideal choice.

Flamestretch Pullover

SKU: Men’s: MSRT00005 / Women’s: MSRT00058

The Flamestretch Pullover is Massif’s warmest layering option. Designed to be an insulating layer worn over Coolknit and/or HotJohns garments. Flamestretch fabric is highly breathable while trapping heat to keep you warm and comfortable.

Constructed with DuPont Nomex brand fiber, the first flame-resistant fiber selected for use in military uniforms. Nomex fibers carbonize and thicken when exposed to the intense heat of a flash fire, creating a protective barrier that reduces or prevents burn injuries. When operating in cold conditions, the Flamestretch Pullover is the ideal choice.

Flamestretch Uni

SKU: MOPC00001

Lightweight, breathable, and extremely stretchy, this comfortable union suit is ideal for all cold weather
conditions that demand seamless warmth from head to toe. Contoured sleeves feature a thumb slit for extra protection and easy layering. Great for use under a dry suit, flight suit, or Massif outer shell
garments. Specifically designed for Coast Guard, SAR, and other situations involving a dry suit and flame
and arc hazards.

FlightWave Edge 130 Blue

SKU: EDGE 130

A military-grade tricopter for long-range mapping, inspection, surveillance, and reconnaissance needs. With its impressive vertical take-off and landing capabilities, hover and forward flight modes, and quick, tool-free swapping of five Blue UAS approved payloads, the Edge is ready for action in any environment – even in 40 mph winds! Designed specifically for government and military applications, the Edge 130 Blue can be assembled and hand-launched in just one minute by a single user to capture high-accuracy aerial imagery with long-range autonomy. Weighing in at only 1200g, the Edge can fly for over 2 hours in forward flight mode, an industry-leading endurance among all other Blue UAS approved drones available.